Having just written about tuning a Manfrotto Tripod that had some issues with its #056 head, I lucked upon another #056 head—all by itself. I am fascinated by this head for its almost unique abilities.
Using two identical tightening knobs on each end of a short beam the large camera attachment plate ends up supported almost directly over the center of the base.
The base rotates, adjusted with a third knob. The hub of the base is calibrated every 15º with a line and marked at two facing 0º and 90º points.
The camera plate has a healthy path the camera tripod screw can move to either center the camera or perhaps center the lens for panoramic shots you want to stitch together later.
The camera can be flipped 90º to put the camera on its side for vertical framing. You can use the other end of the bar’s adjustment to face the camera straight down. OR YOU CAN DO BOTH!
When trying to shoot straight down from a tripod the tripod’s legs start to show up in the bottom corners of the frame. This happens because many tripod heads are attached very close to the center of the hub. Simply having the short adjustment bar on the #056 allows you to offset the camera from the intersection of the tripods legs so they won’t show up in your frame.
You have choices as to the direction on the camera attachment plate you mount the camera and then multiple choices to direct the camera after that.
It doesn’t hurt the #056 head is close to if not the cheapest head Manfrotto offers. If you ever get a chance to use one, or to collect one, I think you will quickly grow to admire it.
Of course I would not use it for video, but for stills its a keeper.







Comments
Post a Comment